Electronic Workbench is an integrated station consisting of instrument panel and working table suitable for  Students to learn and perform various experiments. All measuring Instruments shall internally connect and be fitted in the panel such that only front panel and necessary interfaces are easily accessible to use

Specification :

The basic structure is made of minimum 38×38×15 mm CRCA steel pipe with powder coated and top made up of minimum 19 mm thick plywood ( IS 373-1975) covered with minimum 1.8 mm suitable color mica Four revolving wheels with necessary wheel lock should be provided for easy movement. The table working area shall be covered by minimum 2mm thick antistatic mat to control static discharge. The overall dimensions of work bench shall be minimum 1200×775×1000 mm (L×W×H) with MS drawers minimum 3 numbers of minimum 400×300×130 mm (L×W×H) and thickness minimum 1.2 mm with handle and separate lock on each drawer .Work Table shall be equipped with Mains Supply – 230V AC, 50 Hz, Two Pole MCB of 32A ( Havells / Siemens or equivalent ) and necessary Electrical Sockets and Switches

• Digital Storage Oscilloscope ET-DSO1102E 100MHz r with 2 analog Channel Digital Storage Oscilloscope should have Minimum 1GSa/s sampling Minimum 14 Mpts Memory Depth Vertical range 500uV ~ 10 V/div or better Horizontal range 5ns/div to 50 s/div or better PC interface USB Host and Device
• Function Generator ET-FG1032X 100MHz r with 2 analog Channel Digital Storage Oscilloscope should have Minimum 1GSa/s sampling Minimum 14 Mpts Memory Depth Vertical range 500uV ~ 10 V/div or better Horizontal range 5ns/div to 50 s/div or better PC interface USB Host and Device
• * Power Supply ET-PS7303A Dual power supply shall have 3 isolated outputs minimum two adjustable channels and minimum one selectable channel from 2.5V, 3.3V, 5V Output short and overload protect function 3 independent controlled and isolated output 32V/3.2×2, 2.5V/3.3V/5V/3.2A×1, total 220W 5 digits Voltage, 4 digits Current display, Minimum resolution 1mV/1mA Supports Panel timing output functions 4″ LCD / LED / TFT display Minimum 3 (Independent, series, parallel one each) output modes 100V ~ 230V compatible design to meet the needs of different power grids
• Digital Multimeter Cum LCR Meter ET-DM306 Counts 0 to 1999, 3 ½ digit or better LCD Display DC voltage range 200mV to 1000V. Basic accuracy ±0.5 per cent. DC current range 20mA to 10A , AC voltage range 200mV to 750V. AC current range 20mA to 10A Resistance 200 ohm to 2000 M ohm or better Frequency 2KHz to 1515MHz Capacitance 2nF to 200µF Diode test 1.0mA ± 0.6mA 3 Cmax or better Duty cycle range range 10% to 90%
• Soldering / De-soldering Station ET-SDS02 60W Microcontroller based Temperature Controlled Soldering and De-soldering Station Blower with 12V DC SMD Iron, de soldering pump diaphragm type Input voltage for soldering and de soldering 170 to 270 V Temperature range for soldering 180 to 270°C and for de soldering 180 to 480°C
• Analog & Digital Meters

– Analog Voltmeter DC (0-10V) 1 No. Per Set

– Analog Voltmeter DC (0-1V) 1 No. Per Set

– Digital Voltmeter DC (0-10V) 1 No. Per Set

– Digital Voltmeter DC (0-1V) 1 No. Per Set

– Analog Ammeter (0-1A) 1 No. Per Set

– Analog Ammeter (0-500mA) 1 No. Per Set

– Digital Ammeter (0-1A) 1 No. Per Set

– Digital Ammeter (0-500mA) 1 No. Per Set

Notes:  – Kits for Basic Electronics, Digital Electronics, Analog Electronics , Power Electronics , Network Lab, can be used with this Bench to perform the experiments as per the syllabus of the Institute/ University.